2010-03-05

MG MSN-00100 HD版百式: 休閑製作之一

開功砌笑笑團啲144之前, 偷下懶OOB隻HD版百式先。



一開盒睇到三張標記貼紙! 一張電鍍高清水貼, 一張標準水貼, 仲有一張膠貼! 應該話超唔清膠貼!!!


張高清水貼就OK:


好彩之前買落張電鍍水貼啫



先砌雙腳


唔諗唔改直砌!


因我中意這HD版嘅金色, 所似外甲唔會再噴。 而嗰幾個有小小外露嘅水口就會先油電鍍銀, 然後點一點透明黄... 話明小小外露就唔覺眼架啦...


題外話, 砌MG我會在噴油前遮蓋接合位:



唔諗唔改直砌都可以加燈卦?


小腿外則的噴口:


最後雕通噴口:


而內則噴口亦差不多:


最後在LED中間車條坑, 之後會成粒LED噴金屬紅:



唔諗唔改直砌都可以加補品卦?


加釘:


腳瓜啷換金屬管:


真係能源管嚟架!


簡簡單單噴透明紅已經好靚, 但記住先噴Metal Primer:


做埋大腿連至盤骨嘅走線位:


準備焊接:


焊接續格睇:


攪埋盤骨:



十日進度:


「站起來」




つづく


 


==========================


3月5日 1:26am


我以前砌模型時無聽過OOB這片語, 這三年砌返模型從一位高人解釋才得知OOB = Out Of The Box。


以我所理解的OOB是無改模型的外形及關節, 所以加補品及拉線加燈等還是OOB模型製作。 但 Out Of The Box 不是代表 Items, functionalities, or features provided out of the box are those that do not require any additional installations, plug-ins, expansion packs, or products (quote from Wikipedia)


問題: 咁究竟加補品及拉線加燈等還是OOB模型製作嗎?

at
Labels:

49 comments:

  1. SkyBlueFriday, March 5, 2010 at 2:50:00 AM GMT+8

    你就好啦可以OOB！
    [版主回覆03/05/2010 01:31:00]偷得浮生半日閑呢

    ReplyDelete
  2. Godzilla . exFriday, March 5, 2010 at 3:25:00 AM GMT+8

    所謂 "休閒" ....
    其實係大工程...
    [版主回覆03/05/2010 01:33:00]無乜工程喎, 唔洗諗直砌咋...

    ReplyDelete
  3. KTKC敵Friday, March 5, 2010 at 3:46:00 AM GMT+8

    同意樓下
    加燈加補品...
    咁都係"休閒小品" ?
    [版主回覆03/05/2010 01:34:00]乜都唔諗直砌咋喎...

    ReplyDelete
  4. 邪牛丸Friday, March 5, 2010 at 6:22:00 AM GMT+8

    想當年，就係因為想睇定d，睇下睇下就買唔到囉
    所以依家隻獨角HD，$450左右一定會買
    [版主回覆03/05/2010 01:37:00]呢隻係限定, 但獨角Titanium Ver係平常版。

    ReplyDelete
  5. RyanFriday, March 5, 2010 at 6:51:00 AM GMT+8

    咁仲係OOB
    [版主回覆03/05/2010 01:38:00]咁究竟加補品及拉線加燈等不是OOB模型製作嗎?

    ReplyDelete
  6. Emily and Frederick's FamilyFriday, March 5, 2010 at 7:22:00 AM GMT+8

    想請問"噴油前遮蓋接合位"的用意是甚麼?
    [版主回覆03/05/2010 01:40:00]好讓組件時唔會因油的厚度而接合不到恰處。

    ReplyDelete
  7. 僱傭兵Friday, March 5, 2010 at 7:40:00 AM GMT+8

    閒閒地都咁大工程 , 大制作時點算
    [版主回覆03/05/2010 01:42:00]大制作時又要改外觀, 改關節, 諗佩色.... 煩好多呢...

    ReplyDelete
  8. CHRISFriday, March 5, 2010 at 8:15:00 AM GMT+8

    島主於小弟blog留言, 小弟有感而發作以下回應 看來套用在燈神團長身上也可以.... 『砌模型對我來說就像拉屎一樣 不拉不行,太久不拉對身體不好,拉太多也會吃不消 加燈就好像抆屎一樣 不抆是死不去的, 不過不抆就一定周身唔"墜"財囉.... 不過不要忘記一件事 砌模型唔係為左加燈而砌的 正等如唔係為左抆屎而拉屎一樣.... 就我來說, 以上的比喻雖然嘔心但相當貼切 』 共勉之~
    [版主回覆03/05/2010 01:44:00]老實講, 我就係中意 拉屎 , 一日要起馬 拉 一次...

    ReplyDelete
  9. AlexFriday, March 5, 2010 at 8:24:00 AM GMT+8

    又話係 OOB，結果又加燈又加管……係一個騙局！
    [版主回覆03/05/2010 01:45:00]咁究竟加補品及拉線加燈等還是OOB模型製作嗎?

    ReplyDelete
  10. 小望Friday, March 5, 2010 at 9:29:00 AM GMT+8

    金色唔洗噴，慳水慳力
    [版主回覆03/05/2010 01:45:00]所以咪話休閑製作囉

    ReplyDelete
  11. AnthonyFriday, March 5, 2010 at 1:26:00 PM GMT+8

    That Gold color looks really nice!
    [版主回覆03/05/2010 12:15:00]That's why I bought it hahaha...

    ReplyDelete
  12. 大佬JohnFriday, March 5, 2010 at 3:35:00 PM GMT+8

    唔算OOB~ 我諗好似盒邊塗裝示範咁就算係上左色都係OOB. 冇欺騙消費者, 話明顏色膠水另外買之嘛, 唔包LED播
    [版主回覆03/05/2010 12:16:00]盒邊塗裝示範都無提到LED...

    ReplyDelete
  13. RyanFriday, March 5, 2010 at 3:41:00 PM GMT+8

    唔睇你加補品 OOB都又線又燈 仲以為你玩緊PG
    [版主回覆03/05/2010 12:17:00]反而PG就真係要玩OOB... 太多件啦...

    ReplyDelete
  14. 細尖Friday, March 5, 2010 at 5:39:00 PM GMT+8

    JKL兄真係好中意電鍍版模型喔....
    [版主回覆03/05/2010 12:18:00]仲有透明版添

    ReplyDelete
  15. BillyFriday, March 5, 2010 at 6:57:00 PM GMT+8

    omg.......I won't classify this as "OOB" anymore............!
    [版主回覆03/05/2010 12:19:00]Why? Is it because of the wiring and LEDs or the metal parts or both combined?

    ReplyDelete
  16. 青Friday, March 5, 2010 at 7:28:00 PM GMT+8

    即係咁....而家我噴油都係習慣左先噴上底色(如藍色), 之後再係d高光位噴上(藍色+白), 有d人講呢d叫MAX噴法, 但以前我睇hobby japan, MAX渡邊佢係因為為左慳返噴陰影的步驟, 所以成件模型都噴上黑色, 再係高光位噴上需要的顏色. 咁MAX的作品大部分都帶有重陰影的色彩(即同軍事味道好o岩feel~). 後來卡氏風格大行其道, 乾淨以致粉色成為主流, 黑底的MAX就少左人用了. 回正確, 究竟我用噴高光的方法是否叫MAX噴法?呢下連我自己都唔知...但OOB全名叫Out Of Boxart. 最低限度係不作任何改造吧. 但知道點解又用唔用就係另一回事了
    [版主回覆03/05/2010 12:24:00]乜OOB全名唔係 Out of The Box 咩? Out Of Boxart 字面睇嚟係要做到盒面張 artwork 咁上下喎...

    ReplyDelete
  17. BillyFriday, March 5, 2010 at 8:29:00 PM GMT+8

    My understanding of OOB is just "coloring" the model out from the box! If adding metal / upgrade parts, adding LED etc, you got to "think" how to work already (altough that may be straight forward to most of you). Under the above situation............it won't clasify as "Out of Box" anymore already!! [half off topic] You don't set the "Out of Box" definition to such a "HIGH" level la...........! [/half off topic]
    [版主回覆03/05/2010 15:03:00]Hummm... so my understanding of OOB is kind of wrong?! Got it.

    ReplyDelete
  18. yungSaturday, March 6, 2010 at 3:11:00 AM GMT+8

    太強大la, 唔改野都整到咁靚! 
    [版主回覆03/06/2010 00:28:00]只係HD版嘅金色靚啫...

    ReplyDelete
  19. TonyTsuiSaturday, March 6, 2010 at 3:46:00 AM GMT+8

    勁啊！砌得好快
    [版主回覆03/06/2010 00:29:00]慢囉...

    ReplyDelete
  20. ChangChung YanSaturday, March 6, 2010 at 6:14:00 AM GMT+8

    E排淨係搞架單車，冇時間理D模型
    [版主回覆03/06/2010 00:29:00]?!

    ReplyDelete
  21. TOMSaturday, March 6, 2010 at 6:59:00 AM GMT+8

    今次會用幾多燈咁呢
    [版主回覆03/06/2010 00:29:00]你估呢?

    ReplyDelete
  22. BallSaturday, March 6, 2010 at 7:42:00 AM GMT+8

    唔駛理咩係OOB啦, 唔加燈又點係燈神出品呢?
    [版主回覆03/06/2010 00:35:00]在我而言, 加咗燈會俾到件作品多一份動力, 所以不其然就自動波

    ReplyDelete
  23. 孤月影Saturday, March 6, 2010 at 8:53:00 AM GMT+8

    甘都叫休閒= =
    [版主回覆03/06/2010 00:56:00]唔洗諗點改及噴外甲, 休閒得多

    ReplyDelete
  24. TerenceSaturday, March 6, 2010 at 5:00:00 PM GMT+8

    咁唔算OOB挂```又加燈,又上色(內構)```點睇都係上色成品啦```
    話時話,睇咗你咁多次拉燈,呢次我總算可以話睇得明D線點走```(其實唔係你講得唔清楚,係我悟性低,點極都唔明)
    [版主回覆03/06/2010 18:11:00]上色成品都可以係OOB呀 今次影多咗step by step吖嗎

    ReplyDelete
  25. S.Y.Saturday, March 6, 2010 at 7:37:00 PM GMT+8

    最近你們時常提起的OOB，原來係"o甘"解！ 真係多得你替我解開迷團
    [版主回覆03/06/2010 18:12:00]唔洗客氣喎

    ReplyDelete
  26. JoshuaSunday, March 7, 2010 at 12:08:00 AM GMT+8

    係 部模型 到加 other 模型 ge part ok 5 ok le 
    [版主回覆03/06/2010 18:14:00]随你自己意思吧

    ReplyDelete
  27. 孤月影Sunday, March 7, 2010 at 6:38:00 AM GMT+8

    想問下圖中圈圈...黑色果d包住條線的是什麼呀﹖
    [版主回覆03/08/2010 10:17:00]1mm熱縮膠管
     

    ReplyDelete
  28. 地理堂Sunday, March 7, 2010 at 6:44:00 AM GMT+8

    這個電鍍金色又真係幾靚喎！話時話，1:100 加燈對你來說已經沒有難度了！
    [版主回覆03/08/2010 10:19:00]所以當時一出就買 1:100 加燈真係有D似自動波...

    ReplyDelete
  29. NIKESunday, March 7, 2010 at 8:29:00 AM GMT+8

    唔好意思...！！ 想問吓Metal Primer係咩來呢...？？ 我唔係好知，可以比個樣來得嗎...？？ 唔該晒JKL團長...！！
    [版主回覆03/08/2010 10:25:00]Metal Primer係金屬件的底油: http://plajapan.com/product_info.php?products_id=467

    ReplyDelete
  30. marcolauSunday, March 7, 2010 at 10:12:00 AM GMT+8

    會買1/48 RX-78嘛~~~??
    [版主回覆03/08/2010 10:15:00]太大隻啦...

    ReplyDelete
  31. speedergarySunday, March 7, 2010 at 12:34:00 PM GMT+8

    jkl 兄(燈神兄).我想問.你d燈在深水埗那間店買.同埋要買些什麼材料裝燈.謝謝.(LED,電線....還有些什麼)
    [版主回覆03/08/2010 10:45:00]加莉仔, LED可在鴨寮街買到。至於材料, 除了LED及電線, 當然要辣雞及錫線啦。 BTW, 可以參考這兩篇: 不同的LED及電池分享 超細LED (Surface Mount LED)焊接分享

    ReplyDelete
  32. wlchan18Sunday, March 7, 2010 at 8:09:00 PM GMT+8

    燈神唔加燈好似冇乜奶油，這動作已以經係自動波了，哈哈!
    [版主回覆03/08/2010 10:26:00]今次真係無乜點諗...

    ReplyDelete
  33. Johnduke 島主Sunday, March 7, 2010 at 8:46:00 PM GMT+8

    師父, LED中間切條 坑會做到甚麼效果? 還會在中間加塊分隔?  我昨日去左老鴨, 原來買光纖就在你買LED間星際隔離... 我搵到可變色既LED, 但5mm大, 我嫌太大, 師父有見過3mm的嗎? 我估SMD無變色既掛? 有無? 
    [版主回覆03/08/2010 11:01:00]島主, 師咩嘢父吖, 受唔起呀... LED中間切條坑: 只係手痕, 中間滲了黑油, 在未開燈前有D細節而已! 中間加塊膠片分隔都好喎... 可變色LED有3mm架, 在鴨寮街MTR C2出, 左面第一間工具零件舖有, 我屋企都仲有一粒。

    ReplyDelete
  34. 邪牛丸Monday, March 8, 2010 at 8:51:00 AM GMT+8

    剛剛入了隻unicorn HD+cage，都差不多5舊水，不過好正
    睇黎去日本見到有貨應該都會再入隻改造成banshee+cage
    話時話呢隻百式HD，日本果邊重有無機會入手呢
    [版主回覆03/08/2010 11:03:00]上次去都好似唔多覺重有...

    ReplyDelete
  35. BillyMonday, March 8, 2010 at 7:48:00 PM GMT+8

    Hey brother, just ask a quick question. Actually the coat of the HD model would make us cannot "paint" again or not? As considering to get the Unicorn, of cousre will do full paint (one day in the future). But I'm just doubt on the coating of the HD model which cannot 食油 anymore..........! Any comment on that?
    [版主回覆03/08/2010 12:03:00]Obvoiusly can't just paint on top la...  Need to use the 洗電鍍 method.

    ReplyDelete
  36. BillyMonday, March 8, 2010 at 8:06:00 PM GMT+8

    I see............that means bleaching liquid again..........! XD May be just buy the normal ver. and wait for the China ver. for cage..........!
    [版主回覆03/08/2010 12:13:00]Let me get it first and let you know if it is indeed 電鍍 ver or not la...

    ReplyDelete
  37. BillyMonday, March 8, 2010 at 8:15:00 PM GMT+8

    e..............u plan to get that as well?! Not just 1/144 ver. ma?! 團長!! BTW, I'm waiting you to build the 1/48, add 50 LED inside...........! or even have "smoke" ah!! Be quick to show us............!!
    [版主回覆03/08/2010 12:17:00]OK course la... 144 is only for 笑笑團 The 1/48?! No la... Too big!

    ReplyDelete
  38. BillyMonday, March 8, 2010 at 8:21:00 PM GMT+8

    No worry la!! I wait your Unicorn report la..........! As I won't buy that "too soon"!! XD (Let see I can wait how long.........XD)
    [版主回覆03/08/2010 14:58:00]Anyway, you've good too much "to do list" with too little time hahaha...

    ReplyDelete
  39. HathawayMonday, March 8, 2010 at 9:00:00 PM GMT+8

    燈神唔玩燈點算燈神?
    [版主回覆03/08/2010 14:58:00]邊個燈神?? 邊個

    ReplyDelete
  40. IcedCoffeeMonday, March 8, 2010 at 10:04:00 PM GMT+8

    大師..... 真係要同你學野... 尋日朝早11點一路整到今朝11點唔停手先將一個搖控車控制器crack左放入一部玩具手提入面..... 我買d線好粗... 部玩具摺機個摺位差d穿唔哂d線.......
    [版主回覆03/08/2010 14:59:00]華佬D線都好幼, 揾佢睇睇先啦

    ReplyDelete
  41. BillyMonday, March 8, 2010 at 11:22:00 PM GMT+8

    Anyway, you've good too much "to do list" with too little time hahaha... <--- Minor amendment ---> "No time" replace "too little time"!! Last one built (but not finished as not paint yet) model is 轟雷...........! (even no time to post)
    [版主回覆03/08/2010 16:12:00]Well, as long as you are working at home, it'll be impossible to find private hours, oh, I should say private minutes...

    ReplyDelete
  42. IcedCoffeeMonday, March 8, 2010 at 11:23:00 PM GMT+8

    其實有冇話3v要用幾粗既線？
    [版主回覆03/08/2010 16:14:00]3V唔係問題, 其實要睇幾多Amps, or mA... 搖控車控制器用好細mA, 所以好幼嘅線都無問題

    ReplyDelete
  43. BillyTuesday, March 9, 2010 at 12:33:00 AM GMT+8

    Better say private "seconds"!! Anyway.............can earn money............no complain at all!!
    [版主回覆03/08/2010 16:37:00]Well, I hope you can find a balance...

    ReplyDelete
  44. 孤月影Tuesday, March 9, 2010 at 12:59:00 AM GMT+8

    thx先~~1mm熱縮膠管 ??鴨記有售﹖
    [版主回覆03/08/2010 17:22:00]當然有啦

    ReplyDelete
  45. 孤月影Tuesday, March 9, 2010 at 1:59:00 AM GMT+8

    THX呀^^搵日出開去搵下先~~
    仲有想問呢~~果隻超細既led係幾多V嫁﹖﹖問題少年比較多問題^^""
    [版主回覆03/08/2010 18:00:00]可以參考這兩篇: 不同的LED及電池分享 超細LED (Surface Mount LED)焊接分享

    ReplyDelete
  46. RyanFriday, March 12, 2010 at 5:57:00 AM GMT+8

    而家有人用cast倒過隻仲有綠色透明膠
    [版主回覆03/11/2010 22:42:00]??? 你講緊邊隻???

    ReplyDelete
  47. Emily and Frederick's FamilyMonday, June 7, 2010 at 8:27:00 AM GMT+8

    我最近砌緊隻1/144電鍍沙剎比, 外甲紅色唔會再噴, 但外露嘅水口就學你先油電鍍銀, 然後點一點透明紅. 點知出事, 透明紅d油不單蓋不了新上的銀色.... 就連原來的電鍍紅都洗走埋 .... 攪到現在唔敢攪d水口... 
    我都學你買了隻HD百式, 見到MG百式的水口位做得好好, 基本上沒有這個問題. 但1/144版的水口外露則問題大了....
    請問JKL兄, 有無高見解救呀?
    [版主回覆06/07/2010 14:17:00]Oh! 用水性油好D喎... 之前我砌過隻MG, 不防參考下: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=385

    ReplyDelete
  48. TonyTuesday, September 7, 2010 at 6:50:00 AM GMT+8

    追看中…… 我近排都想試下玩燈，諗住初陣用隻N年前既HG老虎B-3，裝一粒單眼噤多，但係都搞到焦頭爛額，重係未成事。 對大大的技術力，深感敬佩！ 另外想問，大大們知唔知道邊度重有依隻百式 HD賣？ 我行左唔少地方都搵唔到……
    [版主回覆09/06/2010 23:57:00]如果初初玩燈，我建議先試1／100或MG，因體積大啲會容易啲... 這HD版好像已經無哂，要等下Bandai會唔會再版...

    ReplyDelete
  49. TonyWednesday, September 29, 2010 at 6:45:00 AM GMT+8

    謝謝大大的建議啊！ 結果我把目標轉移到部Q版英格倫身上。 雖然還是弄得一頭煙，但總算完成了。 說起來，我的焊接技術實在不好。好幾個分岔位，還是把線焊在PCB上面，再大大粒錫焊係中間，才總算通得到電。不知大大們都是怎麼做的呢？ 關節位也不敢多碰，所以一邊屁股後面有電線外露，還好看不到。 :-P 附上照片一張，聊博一笑。 http://hosted.pikipimp.com/pimped_photo/s/image/54/696/888/IMG_6990-compiled.JPG
    [版主回覆10/04/2010 12:38:00]部Q版警察OK啊, 再努力加多些吧

    ReplyDelete

Subscribe to: Post Comments (Atom)