2008-12-07

2009 BLOG友笑笑團: MSN-001 δ Gundam の 製作Wk5


當大家以為我掛着做隻GN-0000嘅時侯, 哈哈哈, 我又攪返隻Delta...
其實旅行回來後已將Delta餘下的組件攞去浸洗, 中間空當先攪攪隻00!


先講講大水貼...


因貼上嘅盾有凹凸位, 所以先剪裁同樣大小的紙樣:


放在盾上mark低邊位:


再沿邊剪出:


貼上! 兩邊也剪出不同的部份才貼上:


落水貼軟化液之後:



右手之製作...


Match返之前有用金屬釘的地方:


(左面鑽小孔等上釘)


剛剛揾到嘅1mm彈簧及2mm粗而內徑1mm嘅金屬管:


既然雙腳已換上金屬管, 雙手又點可以無呢?


(原件及金屬管的比較)


一支銅支穿晒:


仲可以校angle!


大約會係咁:



聖誕假再續!


つづく



Part 1: 開盒篇
Part 2: 唔識整篇
Part 3: 由零開始
Part 4: 製作一
Part 5: 製作ニ
Part 6: 製作Wk2
Part 7: 製作Wk3
Part 8: 製作Wk4

at
Labels:

16 comments:

  1. TOMSunday, December 7, 2008 at 10:25:00 AM GMT+8

    一條龍貫穿成條手呢招絕喎, 仲可以當埋活動關節, 巧近呀
    BTW, 上次同你提過隻 glue 就係佢;
    [版主回覆12/07/2008 21:36:00]活動關節? 當然唔可以... 好, 下次試試呢隻Super Glue先!

    ReplyDelete
  2. SolaraboySunday, December 7, 2008 at 11:21:00 AM GMT+8

    JKL~~!! Hope you don't mind me asking... But, just a question.. Since you use spray cans (As I'm one of them)..
    For the color of "Gun Metal".. Do you spray "Black" before you spray the Gun Metal on top?? Or just simply spray "Gun Metal"??  I just tried spraying some on the "GREY" (After "Spray Grey")... The color seems a bit odd.. =T  So, I'm just wondering if u spray "Black" before spraying "Gun Metal" (Or tried)
     
    [版主回覆12/07/2008 21:47:00]You mean Tamiya TS-38 Gun Metal and TS-42 Light Gun Metal?  I usually don't spray black as undercoat.  Try not to spray too wet, i.e. light sprays 2 to 3 layers.

    ReplyDelete
  3. 逍遥Sunday, December 7, 2008 at 12:43:00 PM GMT+8

    老兄一直保持着很高的热情啊~~
    BLOG更新速度小第望尘莫及啊~！
    看起来终于是快完成了啊！
     
    [版主回覆12/07/2008 21:48:00]年尾吧!

    ReplyDelete
  4. RaySunday, December 7, 2008 at 7:00:00 PM GMT+8

    wow... that looks amazing ....
    [版主回覆12/07/2008 21:48:00]Thanks...

    ReplyDelete
  5. TerenceMonday, December 8, 2008 at 4:30:00 AM GMT+8

    哈哈```我都以為你挂搞只00高達唔理呢只添```
    睇嚟你嘅時間都幾多下喔,進度都OK啦```水貼都上埋,過多兩日應該起到雙手啦挂```
    [版主回覆12/07/2008 21:50:00]明天出trip, 應該要聖誕假先再攪...

    ReplyDelete
  6. crabchiuMonday, December 8, 2008 at 5:32:00 AM GMT+8

    喉管好過金屬PARTS喎﹗
    [版主回覆12/07/2008 21:51:00]見人見志啦...

    ReplyDelete
  7. 一年戰爭高達迷Monday, December 8, 2008 at 6:18:00 AM GMT+8

    進展速度好快，一定無問題囉  ..... 
    [版主回覆12/07/2008 23:03:00]呢隻一定起到, 仲想年尾前到埋隻00添...

    ReplyDelete
  8. crabchiuMonday, December 8, 2008 at 9:08:00 AM GMT+8

    呵呵，見仁見智才對呀﹗
    [版主回覆12/08/2008 01:16:00]Oh yes!!! 哈哈哈... 唔該哂...

    ReplyDelete
  9. BillyMonday, December 8, 2008 at 2:01:00 PM GMT+8

    Close to finish la...........brother!!! + oil + oil!!!
    [版主回覆12/08/2008 20:15:00]Will do!

    ReplyDelete
  10. SkyBlueMonday, December 8, 2008 at 5:19:00 PM GMT+8

    雙腳換上金屬管,雙手都換是好正路,不過金屬管好似太厚身,露出很多空隙出來,如果薄身d應該會更好睇...
    [版主回覆12/08/2008 20:21:00]同意! 我仲諗緊好唔好用1mm內徑嘅空銅支切成小粒來代替... 但仲未諗到點可以串起廿幾粒嘢來上電鍍色...

    ReplyDelete
  11. HathawayMonday, December 8, 2008 at 9:16:00 PM GMT+8

    我都係玩上釘....
    [版主回覆12/08/2008 20:24:00]Post出來睇睇啦老友...

    ReplyDelete
  12. 逍遥Tuesday, December 9, 2008 at 4:46:00 AM GMT+8

    感觉手臂上的金属圈，有点粗短....有点象珍珠项链的感觉了。哈哈
    [版主回覆12/08/2008 20:52:00]有点像算盤的珠粒... 所以正考慮好用1mm內徑的空心銅支切成小粒來代替, 但還沒想到怎可串起廿幾粒來上電鍍色...

    ReplyDelete
  13. williamgundamTuesday, December 9, 2008 at 7:18:00 PM GMT+8

    唔掂喎，哥仔你越玩越多野喎 !! 引死人咩 ~
    [版主回覆12/09/2008 21:24:00]邊有喎... 都仲係嗰隻首辦...

    ReplyDelete
  14. 地理堂Tuesday, December 9, 2008 at 7:28:00 PM GMT+8

    你真好心機，俾我就一張水貼撻上去就算！
    [版主回覆12/09/2008 21:26:00]我都唔係好想架! 但成張撻上去好難攪d高低凹凸位吖嗎...

    ReplyDelete
  15. KakuTuesday, December 9, 2008 at 8:58:00 PM GMT+8

    師兄你玩金屬件玩到出神入化之境地
    [版主回覆12/09/2008 21:30:00]都係左試右試啫... 但双手仲未揾到想要的校果...

    ReplyDelete
  16. 宁Sunday, December 14, 2008 at 8:43:00 AM GMT+8

    金属万岁~~~哈哈
    [版主回覆12/14/2008 01:27:00]改件万岁... 呵呵呵...

    ReplyDelete

Subscribe to: Post Comments (Atom)