2008-07-11

MG# 103 Zaku MS-06R: 紅彗星專用の渣古工廠 - II.V

因這星期工作很忙, 只有小小進度, 心諗不如weekend先出post, 但之前又開咗張空頭支票, 話星期三會post D update, 話咗出就出小小啦...


馬沙都等唔切, 去咗check機:





小小進度:











製作花絮:


刻坑及刻線! 我最差的一項!



Part 10: 紅彗星專用の渣古工廠 - II
Part 9: 紅彗星專用の渣古工廠 - I
Part 8: 電源
Part 7: 心電圖
Part 6: 麒麟臂
Part 5: 下半身の骨架 + 頭部の電工
Part 4: 雙脚の製作 - 2
Part 3: 雙脚の製作 - 1
Part 2: Day 2
Part 1: New Project

つづく

at
Labels:

23 comments:

  1. TOMFriday, July 11, 2008 at 10:37:00 AM GMT+8

    超正呀  我想貢入個機倉裡面坐下呀
    [版主回覆07/11/2008 14:01:00]咁你要去 富士急Highland Gundam Crisis 先得啦...

    ReplyDelete
  2. 一年戰爭高達迷Friday, July 11, 2008 at 4:09:00 PM GMT+8

    哈哈！馬沙唔使一個 check 機咁辛苦囉！小弟昨晚無意入觀塘行o下(其實搵人幫手攪o的野！)完事後上"大雄模型"及及睇有冇新野出！終於比我發現有o的新 1/100 工作人員，即時買o左(因為好低買！)睇o下o岩唔o岩用：
     
    o岩用就快o的請人啦  ~
    [版主回覆07/11/2008 14:10:00]呢set都有考慮過, 但佢哋個做形好似唔係太合適做技師... 不過市面好似得呢set 1/100人仔...

    ReplyDelete
  3. RayFriday, July 11, 2008 at 5:47:00 PM GMT+8

    wow... that is beatiful.... how much does it cost to make me one?
    [版主回覆07/11/2008 14:12:00]Thanks! But I'm not a pro, guess you need to ask Coty Chan ...

    ReplyDelete
  4. HathawayFriday, July 11, 2008 at 8:36:00 PM GMT+8

    老友, 上左水貼後, 加多兩~三層光油再用2000號沙紙拋光, D水貼邊會冇咁明顯!
    [版主回覆07/11/2008 14:16:00]哈哈哈, 俾你識穿咗添... 其實大水贴有做收邊及防反光步驟, 但D細細粒就無... 都係唔可以懶, right?

    ReplyDelete
  5. AmazingFelixFriday, July 11, 2008 at 10:46:00 PM GMT+8

    刻線時用膠紙係唔夠力的，你可以用“Dymo帶”試試。較果比膠紙好，用針時線會直好多。
    [版主回覆07/11/2008 16:03:00]Thanks for the tip! 無諗過用Dymo帶... 下次試試先

    ReplyDelete
  6. tempoFriday, July 11, 2008 at 10:51:00 PM GMT+8

    越睇越正, 搞到我都搞過個格納庫.. JK兄, 刻線去買支刻針啦,大雄度買日本出隻都係70元.. 效果真係不一樣,幼細又易用, 用過就覺得不是難事啦~ 坊間大多數都用DEMO帶貼住黎刻沒咁易出界....
     
    [版主回覆07/11/2008 16:08:00]刻針已有兩支(其中一支在偉利買, 俾人坤咗支貴嘢), 但無試過用Dymo帶黎做guideline, 經你兩提點, 下次一定試試... BTW, 大雄在邊度...  

    ReplyDelete
  7. TerenceSaturday, July 12, 2008 at 3:27:00 AM GMT+8

    咦```睇嚟馬沙都去埋check 機```呼之欲出啦```
    雖然進度係就少咗D```不過俗語有話慢工出細貨呀嘛```期待出擊嘅時刻```
    PS：想問下只馬沙咁細只```你係點上色架？
    [版主回覆07/12/2008 00:22:00]希望下個weekend可以出擊... (希望下嫁泎)... 隻馬沙咪用放大鏡囉...   睇下E篇你就會發現支放大鏡: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=347

    ReplyDelete
  8. 阿蟲Saturday, July 12, 2008 at 4:42:00 AM GMT+8

    我部機有問題, 撈唔到D相出嚟!
    [版主回覆07/12/2008 00:26:00]去相簿睇下睇唔睇到? http://hk.myblog.yahoo.com/gundam-jkl/gallery

    ReplyDelete
  9. 潛水鏡Saturday, July 12, 2008 at 10:10:00 AM GMT+8

    真係好型仔呀
    [版主回覆07/12/2008 21:27:00]多謝鏡兄...

    ReplyDelete
  10. 某人Saturday, July 12, 2008 at 5:14:00 PM GMT+8

    JKL兄,你真的好強!!!隻紅彗星真嘅一樣,D細位上色又靚,無得彈!!!
    [版主回覆07/12/2008 21:28:00] 多謝令狐沖...

    ReplyDelete
  11. MCSunday, July 13, 2008 at 1:21:00 AM GMT+8

    好掂ｗｏ，你可以拎去比賽ｌａ！
    [版主回覆07/12/2008 21:37:00]OK啦! 不過仲未夠班玩比賽呢...

    ReplyDelete
  12. TerenceSunday, July 13, 2008 at 3:32:00 AM GMT+8

    原來用放大鏡嘅（我以為要用到顯微鏡添 ）```咁筆方面呢？有無馬沙嘅大頭相睇下呀```我想睇清楚你上色上成點樣```
    [版主回覆07/12/2008 21:41:00]筆就一定係面相筆啦... 馬沙嘅大頭遲D先post出來啦, 睇住個側面先啦:

    ReplyDelete
  13. 蝦佬Sunday, July 13, 2008 at 7:49:00 AM GMT+8

    請問骨架係用幾多號噴罐?
    [版主回覆07/12/2008 23:58:00]主要係雙星TS-42, 也有TS-38及好多手油...

    ReplyDelete
  14. TOMSunday, July 13, 2008 at 11:44:00 AM GMT+8

    快啲買噴筆啦, 噴陰影嘛 噴漸變色都有用
    [版主回覆07/13/2008 18:21:00]都話未得落, 遲D先啦...

    ReplyDelete
  15. PhillipsMonday, July 14, 2008 at 3:48:00 AM GMT+8

    天啊。简直是神作，你好pro啊
    [版主回覆07/13/2008 21:41:00]這還可以, 但比pro還差很遠...

    ReplyDelete
  16. kikingMonday, July 14, 2008 at 6:39:00 AM GMT+8

    打你PP  说刻线刻坑最差  感觉很不错啊  都十分的精致JKL兄太强悍拉
    [版主回覆07/13/2008 22:49:00]但這個真的刻得不好! 看, 有DD鋸痕...

    ReplyDelete
  17. 阿蟲Monday, July 14, 2008 at 6:44:00 AM GMT+8

    睇到啦 ! JKL Development 個水貼好正 !    攞嚟送禮一流 , 有心思 ! 下一隻整比我Ｙ , 最多我去結多次緍Ｙ !
    [版主回覆07/13/2008 22:54:00]初初諗過用"JKL Technology"或"JKL Factory", 但老婆話盒模型又唔係我的tech或工廠... 諗諗下就諗到Development... 結多次緍?!?! 咁大鑊? 亞嫂會飛過來殺死我架喎!

    ReplyDelete
  18. NeoTuesday, July 15, 2008 at 12:13:00 AM GMT+8

    馬沙係咪搵緊個燈掣所以唔入駕駛倉住呢~
    J兄好犀利呀!  可以同 [藍波斯菊]爭一日長短~生產埋MS
    [版主回覆07/14/2008 17:26:00]許樂兄又玩我啦? 我這工廠只有一隻渣古, 点同「藍波斯菊」比呀? 馬沙唔入駕駛倉的原因係因為個倉燈實在太似凶兆...

    ReplyDelete
  19. crabchiuTuesday, July 15, 2008 at 6:01:00 AM GMT+8

    大雄在觀塘，你去hkml看下佢的網上店吧。
    [版主回覆07/15/2008 01:09:00]觀塘... So far away喎... 我係灣仔嗎... HKML又抄咗啦!

    ReplyDelete
  20. Gundam0EFSFWednesday, July 16, 2008 at 4:40:00 AM GMT+8

    cool work! Man!  WHY NOT BRING TO COMPETITION? BTW, will u join our gathering on 20/7?
    [版主回覆07/18/2008 15:32:00]This is a gift for my friend in Japan for his wedding so I can't use it for 電擊HK. What gathering on 20/7?  Info info...

    ReplyDelete
  21. wlchan18Tuesday, July 22, 2008 at 8:16:00 PM GMT+8

    may be I should start thinking to get marry KAKAKAKAK.
    hope that this time in next year, I will have at least 1 MG done and put it in my living room ^O^ but first of all, need to set up a 格納庫 like urs
    [版主回覆07/22/2008 12:55:00]It'll be HOT  for wedding this time of year wor!  Are you sure?

    ReplyDelete
  22. 肥仔Thursday, March 26, 2009 at 10:14:00 PM GMT+8

    你好呀師兄，我路過見到好正的製作。想請教幾個問題。
    1. 師兄係用噴罐定係噴槍的？
    2. 如果用噴罐，有無咩技巧呢？定係直接噴就己經可以呢？
    3. 噴咗之後可唔可以係上面用油性油加色？
    4. 仲有，電阻器通常要加係正極定負極？(因為無學過電工，但想試下加led燈)
    真係唔好意思，小弟路過但見到高人，所以問題多多。如果方便的話，可以解答小弟的疑難嗎？

    ReplyDelete
  23. 肥仔Thursday, March 26, 2009 at 10:24:00 PM GMT+8

    師兄你好呀﹗小弟路過，但見到師兄作品好勁，所以想唐突請教﹕ 1. 師兄係用噴槍定係用噴罐直接噴龍骨呢？ 2. 如果用噴罐，有咩技巧要留意，同埋是否直接噴就可以呢？ 3. 噴咗之後可否加油性顏料上面？ 4. 另外，電阻應加在正、負極的哪裏？(因無學過電工，但想加led燈，所以有此請教) 小弟路過但問題多多，真煩到師兄。如果師兄有時間，煩請指點指點。感激不盡﹗
    [版主回覆03/26/2009 16:50:00]唔使請教, 大家交流一下啦: 1. 噴罐直接噴龍骨。 2. 要學識点到即只, 因噴罐好容易會噴到好厚油。 我多數直接噴, 但如果有改過嘢, 會先噴灰。 3. 噴咗之後可以加油性油。 4. 電阻應在邊都得, 因佢無正負之分。

    ReplyDelete

Subscribe to: Post Comments (Atom)