2008-07-02

MG# 103 Zaku MS-06R: 紅彗星專用の渣古工廠 - I

仲要講? 當然先去片...


01



02


03


04


05 (玩打燈)


06


07 (又玩打燈)


08


09 (再玩打燈)



馬沙話: 「拃住隻06S先」...

10


11


12


13



製作花絮


A: 金屬釘


用咗呢兩款:



作例: 大釘比較易, 只要鑽個0.5mm小洞。 細釘就煩D, 要先鑽個1.5mm的凹位, 再鑽0.5mm小洞...


裝上:


B: 細金屬能量管


因金屬補品個洞比組件的喉管細, 所以要將佢磨細。 但條喉管好軟, 好難磨!
終於俾我揾到正嘢! 用酒店攞返嚟的指甲銼... 哈哈哈, 好好磨!


套上金屬能量管



Part 8: 電源
Part 7: 心電圖
Part 6: 麒麟臂
Part 5: 下半身の骨架 + 頭部の電工
Part 4: 雙脚の製作 - 2
Part 3: 雙脚の製作 - 1
Part 2: Day 2
Part 1: New Project


つづく
at
Labels:

27 comments:

  1. AnthonyWednesday, July 2, 2008 at 7:34:00 PM GMT+8

    Almost there! Looks so great, how come you don't try a picture in a darker sence with the cabin light on, that so be really cool!
    [版主回覆07/02/2008 11:42:00]Will do in the next shots with Char sitting inside...

    ReplyDelete
  2. 阿蟲Wednesday, July 2, 2008 at 7:50:00 PM GMT+8

    快啦 ! 快啦 !
     
    借住個扑嚟用Ｙ, 唔該!
    [版主回覆07/02/2008 12:06:00]借來做乜嘢呀...

    ReplyDelete
  3. HathawayWednesday, July 2, 2008 at 7:51:00 PM GMT+8

    Double left shoulder?
    [版主回覆07/02/2008 12:05:00]Yes...  惡D吖嗎...

    ReplyDelete
  4. yungThursday, July 3, 2008 at 12:47:00 AM GMT+8

    你連基地都有埋, 真係好勁啊!!!!
    [版主回覆07/02/2008 18:28:00]都只是壽屋格納庫...

    ReplyDelete
  5. kikingThursday, July 3, 2008 at 2:09:00 AM GMT+8

    美啊~~~金属质感太棒了  再加上金属补件和格钠库的搭配  看起来真是享受啊~~
    [版主回覆07/02/2008 18:30:00]哈哈哈... 好像已經不用再幹下去啦...

    ReplyDelete
  6. BlooderLeeThursday, July 3, 2008 at 3:22:00 AM GMT+8

    配合格纳库，在打灯，效果好棒啊。内构分色精细，看起来相当复杂有机械感
    [版主回覆07/02/2008 22:59:00]謝謝... 那正是我想做到的效果

    ReplyDelete
  7. TerenceThursday, July 3, 2008 at 5:41:00 AM GMT+8

    WOW~~~~睇嚟快有好嘢嚟啦```` 原來成副骨整起係咁正架```唔知嘅話真係以為全部都係金屬嚟添```
    打燈打得好正呀```快D完成埋其餘嘅外甲同武器啦```
    [版主回覆07/02/2008 23:03:00]多謝Terence哥的美言... 其實隻嘢加咗咁多鐵, 咦家真係好重手! 有D驚個display架頂唔住...

    ReplyDelete
  8. TOMThursday, July 3, 2008 at 7:37:00 AM GMT+8

    嘩! 好正呀! 好有質感呀
    [版主回覆07/02/2008 23:40:00]多謝Tom兄... 遲d可能要你請教下手版車仔吖...

    ReplyDelete
  9. KakuThursday, July 3, 2008 at 8:47:00 AM GMT+8

    第六張如果加個人仔仲有FEEL呀 加補品咁細粒眼都凸,好手工,超正呀
    [版主回覆07/03/2008 01:02:00]揾唔到合惜的1/100工人呀... 有無好介紹呢? D釘仔初初都幾難安! 仲一開波就彈走咗兩粒... 但咦家慣咗就OK易...

    ReplyDelete
  10. BillyThursday, July 3, 2008 at 2:59:00 PM GMT+8

    Brother, what tools u would use to cut the matel parts out?! Would u use just the one showing on the instruction?! Would that hurt that tools?!
    [版主回覆07/03/2008 10:29:00]It's ok, the pin is not that hard...

    ReplyDelete
  11. 一年戰爭高達迷Thursday, July 3, 2008 at 3:57:00 PM GMT+8

    咦！仲未請到人！齋馬沙一個實做死佢啦，介紹你去旺角 千里達/英明，o個度應該有o的咁既 SIZE 工人請；咁大個機地冇人做o野點掂呀...
    講番隻渣古，金屬骨架 Feel超強，格納庫多份組件砌成，勁靚仔呢....
    [版主回覆07/03/2008 10:34:00]佢哋只有壽屋人仔... 而1/100的壽屋人仔又比馬沙高大! 所以咪話揾唔到人開工攞... 無理由大佬細粒過其它卒仔吖嗎...

    ReplyDelete
  12. 搵老襯Thursday, July 3, 2008 at 6:19:00 PM GMT+8

    好有feel
    [版主回覆07/03/2008 10:35:00]Yeah!

    ReplyDelete
  13. 地理堂Thursday, July 3, 2008 at 6:47:00 PM GMT+8

    就快埋周，加油加油！(不過埋周等如裝甲覆蓋了內骨架 )
    [版主回覆07/03/2008 14:05:00]所以仲未想埋周...

    ReplyDelete
  14. BillyThursday, July 3, 2008 at 7:49:00 PM GMT+8

    That's good then!! Actully I'm thinking how to cut the "metal rod" (1mm - 2mm) neatly and cleanly as well. U got any idea?
    [版主回覆07/03/2008 14:08:00]1-2mm rods will be a bit different! Using cutters will definitely left cut marks... Need to use small saw to cut them then sand off the edges...

    ReplyDelete
  15. KakuThursday, July 3, 2008 at 10:14:00 PM GMT+8

    我問過鴨記有得賣光纖,$2 一米size有分0.75mm同1.5mm地址在桂林街深水埗地鐵C2出口轉左D燈飾店你去及及
    [版主回覆07/03/2008 14:22:00]唔該哂呀師兄!

    ReplyDelete
  16. BillyThursday, July 3, 2008 at 10:42:00 PM GMT+8

    Thx brother. I think I got to find the saw first. As that's for metal...............!!! Hope that can find such a "small" saw at here...........!!
    [版主回覆07/03/2008 15:12:00]Is there "Home Depot" kind of hardware store?

    ReplyDelete
  17. KakuThursday, July 3, 2008 at 10:49:00 PM GMT+8

    唔使客氣
    [版主回覆07/03/2008 15:17:00]點都要講聲啲...

    ReplyDelete
  18. BillyFriday, July 4, 2008 at 2:51:00 AM GMT+8

    I just bought one tonight from the hobby shop. That mentioned can cut aluminum & copper as well!! Would post in my blog later!! Hardware shop..........would go to there to have a look later. As generally they would sell more heavy duty stuff..........!! Anyway, thx first! ^_^
    [版主回覆07/03/2008 19:38:00]What did you get? A pair of cutters or saw??

    ReplyDelete
  19. BillyFriday, July 4, 2008 at 3:42:00 AM GMT+8

    I bought it from HobbyCo, the one I showed in my blog before!! That's a saw!!
    [版主回覆07/04/2008 01:54:00]I see!

    ReplyDelete
  20. TerenceFriday, July 4, 2008 at 3:43:00 AM GMT+8

    嘩```乜咁睇得起小弟呀```唔好加個哥字啦```真係受唔起架```
    重量級人馬當然有返咁上下份量啦``` display架方面應該唔會有乜大問題嘅```頂得住喔```
    買返個馬沙專用嘅display架嚟襯返佢```FIT到流油啦``
    [版主回覆07/04/2008 01:56:00]唔知點解揾咗好多地方都無馬沙專用嘅display架!

    ReplyDelete
  21. Johnduke 島主Friday, July 4, 2008 at 6:16:00 AM GMT+8

    放在格納庫影相真係好feel, 我買左一個喳, 睇黎買多三個(total 四個)走唔甩, 1/100 都合用.
    金屬骨好正, 加埋打燈影相一流!
    [版主回覆07/04/2008 01:59:00]四個?! 唔夠啦... 我己經入咗十個唔同款式啦...

    ReplyDelete
  22. 喜樂的森Friday, July 4, 2008 at 7:15:00 PM GMT+8

    嘩! 老兄, 你似乎冇諗過要收手喎! 愈做愈精細…
    [版主回覆07/04/2008 12:12:00]應該玩多兩個星期就收手啦...

    ReplyDelete
  23. Hell99Saturday, July 5, 2008 at 3:30:00 AM GMT+8

    精細又有燈, 正!
    [版主回覆07/05/2008 02:52:00]咦家整緊外甲, 下星期一返來睇睇俾d comment啦...

    ReplyDelete
  24. 常威Saturday, July 5, 2008 at 3:48:00 AM GMT+8

    你送個紅渣俾你個friend果時，不如連埋個格納庫啦！我諗佢會感動多d！
    [版主回覆07/05/2008 03:05:00]我都有咁諗過, 不過連埋個格納庫就會變成一個fix死的情境, 所以應該會用display架...

    ReplyDelete
  25. TerenceSaturday, July 5, 2008 at 3:54:00 AM GMT+8

    乜真係咁難揾嘅咩？我呢邊暫時好多地方都有得買```
    或者試下係forum度問下有無人知邊可以買到啦```
    又或者上購物網站度睇下有無啦```我好多時都係咁```外邊揾唔到就上網揾```啱心水，價錢又OK嘅話不妨上網買囉```（一定要揾間信用度高嘅店喔）
    [版主回覆07/05/2008 03:25:00]唔該晒! 星期日會去揾多幾間先...

    ReplyDelete
  26. tempoSaturday, July 5, 2008 at 4:49:00 AM GMT+8

    嘩~~成到爆呀~
    sexyhope san收到一定開心死.
    真係成個zaku工廠咁, 但係專出專用機既..?
    應該有d綠渣幫下手吧...
    [版主回覆07/05/2008 03:29:00]我都希望佢鍾意... 綠渣工廠? 好大鑊架喎...   一整就起馬4-5隻!

    ReplyDelete
  27. 月月Sunday, July 6, 2008 at 7:48:00 PM GMT+8

    this is acidic, the zaku is so sexy led light, and metallic feel
    [版主回覆07/06/2008 13:08:00]哈哈哈, acidic but sexy... Hey, any progress with 小龍女?

    ReplyDelete

Subscribe to: Post Comments (Atom)