2010-02-14

BLOG友笑笑團2010~Z無國界小隊: MSZ-006J

JKL の MSZ-006J


製作概念:


好簡單,為了參加BLOG友笑笑團2010之Z無國界小隊,不用大改只玩色。而我加燈之外,還用了B-Club的改件！今次只有13粒LED,比上次的G30小了3粒。而佩色就差不多跟哂GFF Metal的紅Z-Plus。原本想在2月7日之前完成,但因種種原因而到現在才大至完成！遲些有時間再做回飛機形態。


LED/SMD燈位:
- 頭1粒SMD
- 雙膊各1粒SMD
- 雙胸排氣口各1粒SMD
- 背部中間的尾翼內2粒LED
- 小腿後的噴射口各1粒LED
- 小腿外則的噴射口各2粒LED


電池位:
- 腰內
- 小腿內則各1
- 背部中間的尾翼上端


主色:
- 白: 郡氏#69 Off White噴罐
- 粉红: 郡氏高達專用#5 G Pink噴罐
- 红: 郡氏高達專用#9 G Red 1噴罐
- 深灰: 郡氏#31 Dark Gray 1噴罐
- 淺灰: 郡氏#11 Light Gull Gray噴罐






























































製作記錄:


I - 無縫處理
II - 繼續無縫及忍唔住手的小改
III - 小腿電源
IV - 體內電源及B-CLUB改件
V - 小腿外側
V - 完成雙腳
VI - 完成雙腳
VII - 最後衝幟
VIII - 最後的5%






<< 完 >>

at
Labels:

39 comments:

  1. RyanSunday, February 14, 2010 at 8:10:00 AM GMT+8

    新年快樂
    [版主回覆02/14/2010 01:27:00]恭喜發財

    ReplyDelete
  2. DariusSunday, February 14, 2010 at 8:22:00 AM GMT+8

    生龍活虎~
    [版主回覆02/14/2010 01:30:00]虎虎生威~

    ReplyDelete
  3. SkyBlueSunday, February 14, 2010 at 8:26:00 AM GMT+8

    新年快樂 !!
    [版主回覆02/14/2010 01:30:00]Happy Chinese New Year

    ReplyDelete
  4. 一年戰爭高達迷Sunday, February 14, 2010 at 8:34:00 AM GMT+8

    新年到：祝 梁兄：
    恭喜發財  新年出多o的正o既大作！
    [版主回覆02/14/2010 01:33:00]也祝豪哥越砌越精彩, 女兒學業進步

    ReplyDelete
  5. LicarlySunday, February 14, 2010 at 10:00:00 AM GMT+8

    (Empty)
    [版主回覆02/14/2010 02:32:00]新年快樂, 恭喜發財...

    ReplyDelete
  6. wlchan18Sunday, February 14, 2010 at 11:35:00 AM GMT+8

    恭喜發財!! 祝你龍精虎猛!生 龍 活虎!晚 晚係咁砌!每個月都出一隻
    [版主回覆02/14/2010 22:29:00]恭喜發財 每個月都出一隻? 無燈就得...

    ReplyDelete
  7. 龍千影Sunday, February 14, 2010 at 2:43:00 PM GMT+8

    最鐘意機翼既燈！正！ 祝ＪＫＬ哥新年快樂！身體健康！今年行大運！
    [版主回覆02/14/2010 22:36:00]旗仔支燈其實懶咗,不過用閃燈包裝纸的效果又OK... 新年快樂, 恭喜發財  

    ReplyDelete
  8. 潛水鏡Sunday, February 14, 2010 at 3:21:00 PM GMT+8

    JKL 兄, 萬事勝意 身體健康
    [版主回覆02/14/2010 22:39:00]恭喜發財呀鏡兄

    ReplyDelete
  9. 老坤 Dick 玩具箱Sunday, February 14, 2010 at 6:08:00 PM GMT+8

    真係不負燈神之名！犀利！
    [版主回覆02/14/2010 22:42:00]坤兄過獎啦... 新年快樂~

    ReplyDelete
  10. Godzilla . exSunday, February 14, 2010 at 6:35:00 PM GMT+8

    完滿完成...
    新一年新開始
    [版主回覆02/14/2010 22:44:00]Yeah, 新一年新開始... 其待你的Powered GM及Sinanju

    ReplyDelete
  11. Mr.BSunday, February 14, 2010 at 7:12:00 PM GMT+8

    祝燈神光照大地! 身體健康!笑口常開!!
    [版主回覆02/14/2010 22:49:00]我啲高達至多只可以光照模型櫃... 恭喜發財

    ReplyDelete
  12. andySunday, February 14, 2010 at 8:05:00 PM GMT+8

    新年禮物: Gundam Unicorn 頭7分鐘Video,
    有興趣睇的請到我網誌吧
    [版主回覆02/14/2010 22:54:00]恭喜發財, 新年快樂 尋晚在FB睇咗lu

    ReplyDelete
  13. YAYASunday, February 14, 2010 at 10:35:00 PM GMT+8

    虎年快樂!! YA~
    [版主回覆02/14/2010 22:55:00]虎虎生威... YEAH~

    ReplyDelete
  14. williamgundamSunday, February 14, 2010 at 10:55:00 PM GMT+8

    我係到祝大哥你 :
    虎年行好運, 荷包常滿,
    身體健康, 萬事如意 !! ~
    [版主回覆02/14/2010 22:59:00]多謝天皇, 再祝你年生貴子啦

    ReplyDelete
  15. Ka NangMonday, February 15, 2010 at 12:38:00 AM GMT+8

    JKL兄！恭喜發財！
    祝JKL兄！萬事如意！身體健康！
    [版主回覆02/14/2010 23:00:00]恭喜發財呀Alex兄

    ReplyDelete
  16. ChangChung YanMonday, February 15, 2010 at 4:30:00 AM GMT+8

    恭喜發財 身體健康....
    [版主回覆02/14/2010 23:02:00]新年快樂, 學業進步

    ReplyDelete
  17. HHuman路人甲Monday, February 15, 2010 at 6:09:00 AM GMT+8

    團長:
    虎年 要活得 更加甜!!!
    [版主回覆02/14/2010 23:03:00]每天都要活得甜美呢~ 恭喜發財

    ReplyDelete
  18. 僱傭兵Monday, February 15, 2010 at 7:35:00 AM GMT+8

    虎年 笑笑團虎虎生威
    [版主回覆02/14/2010 23:54:00]大家都虎虎生威...

    ReplyDelete
  19. 羊仔Monday, February 15, 2010 at 7:46:00 AM GMT+8

    JKL兄, 祝你新年快樂, 加燈順利
    [版主回覆02/14/2010 23:55:00]恭喜發財呀羊兄

    ReplyDelete
  20. 雙子座Monday, February 15, 2010 at 8:12:00 AM GMT+8

    JKL兄~ 祝你虎年勝牛年, 歡笑樂連連~~
    [版主回覆02/15/2010 00:43:00]再祝雙子座嘅創作無限~

    ReplyDelete
  21. 地理堂Monday, February 15, 2010 at 1:12:00 PM GMT+8

    我祝梁氏伉儷在虎年身體健康，如意吉祥，步步高升！
    [版主回覆02/15/2010 21:26:00]祝啊占龍精虎猛, 蜜運成功

    ReplyDelete
  22. ROX1Monday, February 15, 2010 at 4:45:00 PM GMT+8

    祝  JKL   萬事稱心如意, 想嗰樣一定得嗰樣....
    [版主回覆02/15/2010 21:27:00]恭喜發財呀ROX兄

    ReplyDelete
  23. 吱吱兄弟Monday, February 15, 2010 at 8:22:00 PM GMT+8

    祝 JKL 伉儷虎年順境化，家肥屋潤，燈神光芒照耀大地。
    [版主回覆02/15/2010 21:28:00]哈哈哈, 成你貴言, 但模型光芒至多只可以照耀模型櫃...

    ReplyDelete
  24. Lazy KingMonday, February 15, 2010 at 9:08:00 PM GMT+8

    祝新年快樂, 身體健康!
    [版主回覆02/15/2010 21:29:00]恭喜發財呀King Sir

    ReplyDelete
  25. 大佬JohnMonday, February 15, 2010 at 9:29:00 PM GMT+8

    紅眼好重戰機黑騎士feel..
    [版主回覆02/15/2010 21:32:00]本來想用绿燈, 但光度足, 用埋紅色...

    ReplyDelete
  26. NIKEMonday, February 15, 2010 at 10:23:00 PM GMT+8

    我來你到拜年...！！ 祝你：金銀滿屋，財源滾滾....！！ 你個Z高達超有型啊....！！
    [版主回覆02/15/2010 21:34:00]恭喜發財呀Nick兄... 今次隻Z其實做唔到我心目中嘅設定, 所以我覺得唔係好合格...

    ReplyDelete
  27. yungMonday, February 15, 2010 at 11:33:00 PM GMT+8

    恭喜發財! 模型廣進! 身體健康!
    [版主回覆02/15/2010 21:37:00]恭喜發財呀容易兄

    ReplyDelete
  28. AnonymousTuesday, February 16, 2010 at 11:46:00 PM GMT+8

    祝新年快樂, 萬事勝意. 今年會唔會整隻老虎玩下, 團長? 恭喜發財
    [版主回覆02/16/2010 22:20:00]恭喜發財呀三星兄... | 老虎? 應該都唔會啦...

    ReplyDelete
  29. AlexWednesday, February 17, 2010 at 11:43:00 AM GMT+8

    祝 JKL 兄虎進金來
    在下潛水已久,發現此地後驚為天人,因兄之模型作品實在太精湛,每天都來看看兄有沒有新作,最近也忍不住加入創作.. 希望兄多多指教
    [版主回覆02/17/2010 09:49:00]恭喜發財... 好,大家交流一下心得吧...

    ReplyDelete
  30. 青Wednesday, February 17, 2010 at 6:45:00 PM GMT+8

    雖然遲左...
    我都祝你心想事成, 得心應手, 身體健康同步步"膠"昇
    [版主回覆02/17/2010 10:50:00]恭喜發財呀青爺... 有心唔怕遲, 十月都係拜年時, 何況初七團拜呢

    ReplyDelete
  31. KakuWednesday, February 17, 2010 at 9:00:00 PM GMT+8

    恭喜發財、新年快樂、身體健康!!! 團長今年有咩模型大計,除了加燈外會否玩舊化及超可動!
    [版主回覆02/17/2010 13:58:00]恭喜發財呀Kaku大師兄... 舊化唔玩啦, 依家中意啲模型新新淨淨, 好似剛剛出廠咁... 或者試吓中級可動吧...

    ReplyDelete
  32. macross2016Thursday, February 18, 2010 at 4:06:00 PM GMT+8

    恭喜ＪＫＬ新團長虎年模魂常駐、靈感不絕、出多Ｄ大作
    [版主回覆02/18/2010 09:56:00]恭喜發財, 新年快樂, 萬事勝意... 好其待你的超detail Z!!!

    ReplyDelete
  33. 阿蟲Thursday, February 18, 2010 at 6:23:00 PM GMT+8

    祝JKL 兄 龍精虎猛，萬事勝意, 年生貴子。
    [版主回覆02/18/2010 10:34:00]恭喜發財呀Ken哥... 年生貴子? 有此考慮, 但可能要退出模檀...

    ReplyDelete
  34. 老邪Thursday, February 18, 2010 at 7:19:00 PM GMT+8

    你的打電動打磨器 是可安裝這種轉換頭 當用了轉換頭,任何合用的尺吋工具組也可裝上去用
    [版主回覆02/18/2010 11:47:00]Thanks for the info

    ReplyDelete
  35. BillyThursday, February 18, 2010 at 7:24:00 PM GMT+8

    Good job brother!! I love the color combination very much!!
    [版主回覆02/18/2010 11:48:00]THX... But I still think this is a "失敗之作"

    ReplyDelete
  36. BillyThursday, February 18, 2010 at 7:50:00 PM GMT+8

    Don't worry brother!! I think non of us would feel the one "just" finished is perfect. As always expecting the next one can be better............!! BTW, keep going, 2010 just started!!!
    [版主回覆02/18/2010 12:11:00]Yeah, you mentioned it before...

    ReplyDelete
  37. BillyThursday, February 18, 2010 at 8:14:00 PM GMT+8

    Did I say that before?! Ah ya............totally forgot already!! Sorry Sorry!!
    [版主回覆02/18/2010 12:18:00]Yeah, you said only the modeler will notice the defects and always think it is not good enough hahaha...

    ReplyDelete
  38. 老邪Thursday, February 18, 2010 at 8:23:00 PM GMT+8

    我就是用這種轉換頭,接上這種圓型分割片去鋸模型的 希望資料對你有用
    [版主回覆02/18/2010 13:57:00]我在日本見過set "浦和工業 HCD-SET カッティングディスクセット" (Cutting disk set): http://item.rakuten.co.jp/teduka/4582154510193/ 軸径2.34mm, 而Mr Hobby嘅軸径係2.35mm, 所以應該fit哂! 香港好似無浦和工業的工具賣, 而我三月尾先過東京, 但依家整緊嘅模型需要切好多嘢, 所以先至周圍揾...

    ReplyDelete
  39. williamgundamFriday, February 19, 2010 at 9:40:00 PM GMT+8

    大哥又一燈神之作 ~  又型又正，效果好好，攝影又有 feel，掂 !! ~  　 　
    [版主回覆02/19/2010 14:12:00]咪玩我啦... 好多撻Q位呢...

    ReplyDelete

Subscribe to: Post Comments (Atom)