2009-02-27

(Updated 2/27 10:52am Tokyo) 1/72 VF-25F 河森正治通透版 - 開盒篇

前晚一到東京就即刻去攞月頭揾朋友幫手訂嘅「通菜」!


「通菜」除咗透明外甲, 仲有乜嘢特別呢?


1. 高清骨架用水貼:




2. 河森正治「通菜」上色及水貼說明:








「通菜」外甲刻線都好好, 滲唔滲線好呢? 我諗滲淺灰都OK...


但骨架就要噴過哂啦!



有睇開我blog嘅朋友應該記得我在 Sword Impulse Gundam 亮燈篇-Step 3 內講過會帶埋啲架餐過來... 前晚買外賣就係想節省時間去即啪!


第一晚


啪咗雙腳:



第二晚


前晚因酒店房間的燈光太暗, 啪完雙腳之後攪到對眼out focus!


昨晚開工前call front desk, 問問有無桌上閱讀燈... 哈! 原來係有架! 好好多!


咋咋林啪埋雙手:


見未眼訓! 啪埋全副骨啦!



つづく



27th Feb 10:48am Tokyo


First Snow this winter at Tokyo!




It's also the coldest day in Tokyo this winter... 4C now!



27th Feb 12:22pm Tokyo


Keep snowing!!!


at
Labels:

22 comments:

  1. 逍遥Friday, February 27, 2009 at 4:02:00 PM GMT+8

    老兄也是经常玩到半夜啊，凌晨2点多更新。。。哈哈
     
    [版主回覆02/28/2009 01:42:00]東京時間是凌晨3点多啊...

    ReplyDelete
  2. 吱吱兄弟Friday, February 27, 2009 at 5:31:00 PM GMT+8

    咁啪法好難會眼訓喎。
    [版主回覆02/28/2009 01:43:00]咪就係! 真大鑊!

    ReplyDelete
  3. tempoFriday, February 27, 2009 at 6:06:00 PM GMT+8

    通菜係咪預定先有架.?
    我都想入番隻要黎下次菜聚...
    [版主回覆02/28/2009 01:44:00]在日本有"Pro Shop"嘅模型舖有得賣...

    ReplyDelete
  4. SkyBlueFriday, February 27, 2009 at 6:30:00 PM GMT+8

    JKL兄你住o個度是邊樹呀？我好鍾意可以望到個D屋
    [版主回覆02/28/2009 01:45:00]在東京南青山與六本木附近...

    ReplyDelete
  5. DickyFriday, February 27, 2009 at 6:54:00 PM GMT+8

    哈哈哈...真係服咗你囉!出差的時間也不放過...
    [版主回覆02/28/2009 01:46:00]心引吖嗎...

    ReplyDelete
  6. TerenceFriday, February 27, 2009 at 8:44:00 PM GMT+8

    哈哈```睇你之前“蜡”齊架生出發就知你諗乜啦，今日終於都自爆咗啦```
    盒通菜係幾正喔，D水貼好靚睇上去好似一塊超薄嘅鐵片，我諗一定好有質感``` 唔知透明件你會點上色呢```
    第一張風景相幾好喔，雪花飄飄咁，我咁大個仔都未親眼睇過一場雪呀```
    PS：最後果個相，唔通隔離棟樓係咪火燭？飙煙嘅！？
    [版主回覆02/28/2009 01:50:00]啲水貼真係好靚... 透明件當然上透明色啦, 遲啲砌到嘅時候便post出來... 隔離棟樓嗰啲係蒸汽嚟架!

    ReplyDelete
  7. 僱傭兵Friday, February 27, 2009 at 9:27:00 PM GMT+8

    D水貼好似蝕刻片,
    [版主回覆02/28/2009 01:50:00]好指細呢!

    ReplyDelete
  8. 僱傭兵Friday, February 27, 2009 at 9:30:00 PM GMT+8

    你今次去日本邊處, 會唔會去大阪
    [版主回覆02/28/2009 01:51:00]只在東京, 好小去大阪支部...

    ReplyDelete
  9. BallSaturday, February 28, 2009 at 12:20:00 AM GMT+8

    除了dilaton外, 又多o左個出trip砌o野o既模友了.....
    [版主回覆02/28/2009 01:53:00]証明我哋兩個都係short short哋...

    ReplyDelete
  10. Hell99Saturday, February 28, 2009 at 12:40:00 AM GMT+8

    唔夠光眼好攰, 不過飲呢支綠葉ok.
    上次出trip晚上飲呢支綠葉, 成晚眼光光, 最後出去買了1000yen card.......
    [版主回覆02/28/2009 01:54:00]唔好飲咁多呀, 有興奮劑架...

    ReplyDelete
  11. HathawaySaturday, February 28, 2009 at 1:02:00 AM GMT+8

    唔夠光好難砌喎, 老兄! 會唔會去買噴罐幫骨架上色?(in japan)

    ReplyDelete
  12. KakuSaturday, February 28, 2009 at 1:12:00 AM GMT+8

    毒死人咩想
    [版主回覆02/28/2009 01:57:00]邊有喎

    ReplyDelete
  13. 家家爸Saturday, February 28, 2009 at 2:31:00 AM GMT+8

    見到啲水貼眼都花
    [版主回覆02/28/2009 01:58:00]但花得嚟又好高清喎...

    ReplyDelete
  14. 吱吱兄弟Saturday, February 28, 2009 at 4:04:00 AM GMT+8

    請教一吓，透明水口點處理呢??
    [版主回覆02/28/2009 02:00:00]我會剪剩小小, 然後用cutter慢慢cut... 遲啲砌到嘅時候便post出來啦...

    ReplyDelete
  15. 地理堂Saturday, February 28, 2009 at 6:27:00 AM GMT+8

    I see, you brought the tools to build this kit. I am afraid you did not bring the most important tool, namely a small modelling saw. I won't use ordinary clipper to remove transparent parts from the runners, I used a modelling saw instead. This will avoid scratching the parts by the clipper. On top of that, the applied force from the clipper on the injection point ( 水口 ) will turn the plastic white near the pressure point. This phenomenon is even worse than scratching the transparent parts. Just my 2 cents though.
    [版主回覆02/28/2009 02:03:00]Like I said before, 我會剪剩小小, 然後用cutter慢慢cut... 無試過用modelling saw, 返港試吓先... Thanks for the tips! BTW, 我只係啪咗副骨, 透明外甲回家先攪

    ReplyDelete
  16. TOMSaturday, February 28, 2009 at 9:09:00 AM GMT+8

    咁快食佢, 趁新鮮乎?
    [版主回覆02/28/2009 02:06:00]由訂嗰日起已經一路諗要即啪... 但都係啪唔哂, 回港再丁返熱食過

    ReplyDelete
  17. JKLSaturday, February 28, 2009 at 9:55:00 AM GMT+8

    我都想! 但酒店無後樓梯喎...

    ReplyDelete
  18. kitSaturday, February 28, 2009 at 11:38:00 AM GMT+8

    呢隻係好正，見到河森張相，真係要恭奉下先；得一盒唔多捨得搞，所以都要忍下手先！睇你的好了
    [版主回覆02/28/2009 09:04:00]唔使唔捨得喎, Proshop版Bandai會再出架, 一齊砌啦... (等我可以學吓嘢吖嗎 )

    ReplyDelete
  19. TerenceSunday, March 1, 2009 at 6:54:00 AM GMT+8

    OH~~~~~原來係蒸汽嚟嘅```真係大鄉里囉``
    差D想叫你拨個輪去警察廳添```
    [版主回覆03/01/2009 20:08:00]無用! 去到都唔識講...

    ReplyDelete
  20. CHRISTuesday, March 3, 2009 at 7:59:00 PM GMT+8

    隻通菜越睇越中... 香港必到600一隻 師兄有冇機會殺多一隻益下小弟
    [版主回覆03/03/2009 13:29:00]Sorry Chris, 唔敢幫blog友買模型返港, 唔想順得哥情失嫂意吖嗎... BTW, 在秋葉行過兩間Proshop都已經無貨...

    ReplyDelete
  21. CHRISWednesday, March 4, 2009 at 6:04:00 PM GMT+8

    完全理解 btw 入手方法應該是在pro shop買吧 我都托過遊日的fd搵過也找不到 應該是指找不到pro shop吧 秋葉有哪些pro shop是香港人容易摸到的??
    [版主回覆03/04/2009 14:43:00]1) Asobit City Hobby: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=9813 2) Yellow Submarine: 由Radio會館入 扶手電梯上4樓樓: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=1569

    ReplyDelete
  22. YAYAFriday, March 6, 2009 at 10:12:00 PM GMT+8

    嘩!! 有雪呀~
    [版主回覆03/06/2009 15:05:00]尋晚香港落"薄"喎

    ReplyDelete

Subscribe to: Post Comments (Atom)