仲記得06年第一次去會展個動漫展, 見到隻1/100 Seed Astray Gold:
「嘩! 老婆(當時女友,現在財長), 呢隻嘢好正呀!」
「噤你係咪想買吖? 買咗要砌喎...」
就係噤, 我又返來啦...
用咗一晚齋砌(現在叫素組), 覺得超正! 同細路時完全唔同, 又唔使用膠水, 唔噴唔油已經好靚! 所以又用咗一晚同佢影傻瓜DC沙龍:
1/100 Gundam Seed Astray Gold Frame Amatsu MBF-P01 Re2
開咗個頭, 見一晚完功, 砌埋隻在05年東京Gundam Generating Figures Expo時買啲特別板:
Gundam RX-78 Limited Edition
之後行行吓街又見到隻F91, 有個MG嘜頭, 見盒邊啲圖有埋成隻龍骨, 即買!
隻F91是我第一次接觸MG, 感覺好犀利、勁detail, 因而再次開始油detail、上滲線及噴透明cover半光油 (這都是細路時已懂得的基礎功):
MG Gundam F91
繼續就開始瘋狂地入貨! 又MG, 又SEED 1/100+HG, 連SG都殺! 但都只係停留在砌F91的階段:
MG Ver 2.0 Gundam RX-178 Mk-II (TITANS)
1/100 Blaze Zaku Phantom ZGMF 1001/M
Gundam Seed C.E.73 StarGazer
MG Freedom Gundam ZGMF-X10A
1/100 Force Impulse Gundam ZGMF-X56S/α
1/100 Akatsuki Gundam with Oowashi & Shiranui Packs
1/200 XXXG-01W Wing Gundam (SG #2)
MG [Zeta Gundam - Special Coating Edition] X [HY2M 12]
直至砌隻紅渣2.0, 開始認真地上色! 但仲未全隻噴... 攝影方面也換咗部Pro啲DC, 仲玩埋燈光及manual shutter等等:
MG #98 MS-06S CHAR'S ZAKU ver. 2.0 - Getting Ready @ Zeon Base
之後砌咗隻電鍍沙煞比...唔可以用沙纸磨水口, 呢隻真係考刀功!
MG #29 MSN-04 Sazabi Metallic Coated Version - Final Shots
最後係隻橙突, 這次終於是廿年來第一次全隻上色及配色, 第一次加燈, 第一次加钉...
MG# 90 GAT-X105 Strike Gundam＋I.W.S.P. (製作過程 Part 1)
由一晚素組到現在兩個幾月先起一隻, 之後是否真的買噴筆、上陰影呢?
好啦! 跟住砌乜好呢?
原本有晒idea去整隻Strike Freedom (07年wlchan18送的結婚禮物)...
但因5月頭放大暇返温哥華, 再加上近排各方勁人起咗好多靚靚HGUC1/144, 不如試吓用一個月去砌隻TR-1?
又剛剛返睇咗套Zeta三部曲(A New Translation), 又好想砌埋隻Zeta三号機!
点好呢？星期一決定...
四月八日 00:00
老婆vote咗Z3...
TR-1六票...
Strike Freedom 五票...
Z3 四票...
TR-1得六票, 就砌「電擊15年祭特別版TR-1」啦！
Strike Freedom la~ and donate the TR-1 parts to me
ReplyDelete[版主回覆04/04/2008 00:09:00]Sorry la... the TR-1 is a limited edition where I found in Akiba last Jan ( http://hk.myblog.yahoo.com/gundam-jkl/article?mid=324 ), cost me more than 5,000 yen! Ok, Strike Freedom 一票...
ＴＲ－１個盒咁特別既＠ｏ＠？
ReplyDelete你同我一樣．．．．．我都係０６年左右先砌模型到依家．．．．．
[版主回覆04/04/2008 00:11:00]其實我廿幾年前已經開始... 只係中間停咗廿幾年... 盒TR-1係電擊特別版... 噤我計你TR-1一票啦...
Strike Freedom 一票... TR-1一票...
5000yen, unexpected ....anyway, I was joking ja I knew they had a 15 yrs anu limited edition, but there was no one posted the price if I want to get the parts, I will have to wait until I get back to HK or go to Japan. I just can't get these parts in CA, their costs are skyrocket high.....
ReplyDelete[版主回覆04/04/2008 00:15:00]I only saw it once in Tokyo (purchased immediately) and never found it in HK! Will let you know if I find it again!
I vote for TR-1 ....
ReplyDelete[版主回覆04/04/2008 01:06:00]Ok ok...
TR-1二票... Strike Freedom 一票...
作為已婚人仕，你已經算多產了。請繼續讓我們塗毒你的模型生活
ReplyDelete[版主回覆04/04/2008 12:40:00]你哋無毒我...我都仲有啲自制... Hey, 你未 vote 喎...
Of course "Strike Freedom" la, my personal flavour! You're going to make this in Vncouver??
ReplyDelete[版主回覆04/04/2008 12:38:00]Too troublesome to take all the tools and paint all the way to Vancouver!
Z3一票Ｙ, 唔該
ReplyDelete作為已婚人仕, 你簡直係多產!!
[版主回覆04/04/2008 12:50:00]Finally 有人投Z3 啦... 都唔係多產...開頭嗰d都是草草了是...
見你兩年間的進步已經係"飛躍"!! 要keep住呀!! 我投TR-1一票.
ReplyDelete[版主回覆04/04/2008 12:48:00]其實開頭無諗過會全程投入...所以都是草草了是... 直至隻红渣2.0, 冇再懶散, 把小時侯的功夫使出來...
Char's Zaku is really a good model, plus your background and the effect, you make it so poisoning. i must buy it and make one for myself later.
ReplyDeleteAlthough Z3 is a great MG but u already have 1 zeta and u only have 1 month, so i will vote for TR-1
[版主回覆04/05/2008 00:31:00]Try MS-06R 黒色三連星 instead:
As for the the Zeta, the one that I already build is based on ver1.0 where the Z3 is based on ver2.0 wor...
PS: i wanna vote for Z3 but it may take too much time. i don't wanna see half product and have to wait u come back and finish the rest. i will go crazy during the waiting time
ReplyDelete[版主回覆04/05/2008 00:32:00]To be honest, I'm not sure if I can finish the TR-1 in one month as I am thinking of marking more lines around the body...
砌 sf 啦 ! 不過我口個 隻(普通版) 都未砌 .....
ReplyDelete[版主回覆04/05/2008 00:39:00]我諗住隻Strike Freedom會有d爆甲, 除咗對眼之外, 我仲諗住兩邊胸口及兩個膝蓋都加燈...(係諗吓姐...哈哈哈)... 所以可能要整成三個月...
Z3!!!!
ReplyDelete仲要改番the ride隻color!
[版主回覆04/05/2008 14:34:00]乜嘢係the ride color呢？
Gundam Neo Experience 0087: Green Divers
ReplyDelete[版主回覆04/05/2008 15:25:00]Oh of course! 盒Z3已是這color scheme...
你都好勤力地出產喎, 反而我自己就慢到死...
ReplyDeletestrike freedom啦~呢隻野真係出得好正~
[版主回覆04/05/2008 18:21:00]仲意吖嗎 所以咪快快手囉...
嗶嘩！
ReplyDelete全是高違達喎！
請到我站看看及回應吓
謝謝
SF吧。豪华版的看起来不错
ReplyDelete[版主回覆04/06/2008 15:40:00]豪华版應該只是多了些电鍍件吧!? 對嗎?
我會投Zeta三号機一票~ 因為我覺得佢特別過SF~
ReplyDelete[版主回覆04/06/2008 15:41:00]唔同era, 所以機體好唔同...但我都好鍾意...
dilaton兄話毒你的模型生活 毒你 毒你 毒你 咁我就 TR-1 一票, 呢款正
ReplyDelete[版主回覆04/07/2008 17:02:00]好彩我係百毒不侵...
TR-1一票~呵呵～
ReplyDelete[版主回覆04/08/2008 00:21:00]加埋你嗰票, TR-1得票最多!
八号00:00:
ReplyDelete老婆vote Zeta...
TR-1六票... Strike Freedom 五票... Z3 四票...
TR-1 得六票, 就砌TR-1啦！
我既一票果然夠晒神聖啊~
ReplyDelete[版主回覆04/08/2008 12:30:00]本來我估老婆會投Strike Freedom, 点知佢vote Z3! 所以你嗰一票係好決定性!
既然有結果,咁幾時開工呀
ReplyDelete[版主回覆04/08/2008 12:37:00]昨晚已經睇咗manual & parts... 應該會用返電擊設定啲黑加深藍... 可能今晚就開工!
WOW 正呀正呀~ 好期待
ReplyDelete[版主回覆04/08/2008 13:05:00]哈哈哈, 都未開波, 諗吓都話正??
因為呢個機體係我其中一部鍾意既所以心急左少少
ReplyDelete[版主回覆04/08/2008 15:20:00]艾絲, 初陀媽嗲...
小弟想請教一下滲線係點ga ??
ReplyDelete點樣滲ga...........?
[版主回覆05/05/2008 01:27:00]有兩個方法, 容易的是用水性Gundam Marker! 先畫在刻線上, 然後用面紙抹邊便可。
複雜啲要用稀色黑油, 可以在 WilliamGundam 的留言版找到答案...
試下Gundam Marker先啦, 平靚正...
我都有個問題想問下```上邊你話只Sazabi係電鍍嘅```磨唔到水口```咁你係點整走架？我個人所知斋用刀點都有痕留抵過喔````
ReplyDelete睇相度睇唔到嘅```難道你嘅刀功厉害成咁```（咁就要你多多指教啦）定係係相機度做手腳呢？（攝影技術咁厉害就更加要你指教啦`` ）
[版主回覆06/05/2008 21:54:00]呢個post有講: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=385