2008-02-06

壯士斷"槍" (Broken Gun)

今朝本來想攞隻曉高達返公司,諗住過年可以金光閃閃。

點知

一個唔小心,斷咗!



再見啦大鷲...
Lucky that I took pictures: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=125

好彩仲有不知火末砌!!!


各方大佬,請問有乜保救方案呢?
A) Re-order the parts from Bandai
B) AA glue
C) Small screw

9 comments:

  1. 你同我一樣,我都係咁, 為有只係裝不知火就算啦! 其實不知火裝左上去重正 ......
    [版主回覆02/06/2008 14:54:00]"同是天涯淪落人,在這傷心曉背脊上同行..." 哈哈哈哈哈 好,過完年起隻不知火

    ReplyDelete
  2. 高達 "在" 地球聯邦軍
    祝大家新年快樂!

    ReplyDelete
  3. 恭喜發財, 新一年買多d模型喇!
    隻曉好貴架 wor, 真可惜!

    ReplyDelete
  4. 斷左唔緊要.... 祝  財源廣進

    ReplyDelete
  5. set銅枝再加模型膠水……我諗應該得

    ReplyDelete
  6. i think you can reorder the part from MK's 先達廣場. let me ask my friend and get the shop name for u.
    [版主回覆02/11/2008 01:15:00]Hahaha... No need la!  I will order in Tokyo

    ReplyDelete
  7. I think you can fix it by using Yellow Submarine's  ball joints
    [版主回覆02/12/2008 13:42:00]Problem is that I can't take the "ball" off the gun... It's stucked inside...

    ReplyDelete
  8. 易拎講得無錯   鑽窿加銅支駁返佢就得  唔駛掉喎 我隻曉都係斷左呢個位  以經係用關節技唔係用改件既ball joint架啦  咁都斷=_="  好彩整得返  仲硬淨過以前(我近呢兩/三年 好多joint位斷左都係用呢個方法去救)
    [版主回覆02/12/2008 21:40:00]ICIC...  I wonder why everyone is having the same problem!  We should voice it to Bandai...  Anyway, I didn't trash it as I was thinking to re-order that particular part.  But now I will try 易拎's method first and find a way to take the "ball" out... Thanks 易拎 & 熒惑 for advice!

    ReplyDelete
  9. 我o個隻係MG strike既手辦改件黎  唔係1/100曉

    ReplyDelete