繼續U Light I Like! 什麽是U Light I Like? 看看第一篇吧!
Step 4: 小腿之光
都係忍唔到手!小腿那5個噴射口點可以無光呢?
噴射咀的接口改用Wave的C-Pipe No.3 (1.3mm外径 x 1.13mm内径)
銅通預長小小是方便套入金屬改件:
兩邊用1mm光纖連至中央部份:
以上的光纖末端在洞口內推入1至1.5mm,那麼光源便會有多一點層次...
之後在中間放一粒普通的3mm LED:
LED碼在小腿骨上:
前面亦大至一樣,只是沒有用銅通:
大家都知我比較鐘意用金屬釘,今次用Adlers Nest黃銅色的ANE-0030 (0.6mm釘,0.3mm支柱)
準備焊接
為了保持彈性,電線要屈成S形:
焊好後續一裝上小腿骨上:
最後測試:
後面
前面
下期預告:
... つづく
製作過程:
出神入化.............! BTW, I've back already!
ReplyDelete[版主回覆07/27/2011 12:18:00]Waiting for your call man!!!
Call u next week la!! (cannot meet / call anyone this week yet as too busy to prepare "invitation card"! )
ReplyDelete[版主回覆07/27/2011 12:26:00]No problem~ How about lunch at Tai Koo Shing??
神呀~~又學到野啦~~ 想問下呢~~你用果隻電線係幾粗嫁﹖好似幾好用甘wor~~
ReplyDelete[版主回覆07/27/2011 13:33:00]我是用Teflon BE03A020,外経0.56mm,導体0.26mm: http://www.aisan.co.jp/products/teflon_cable.html 在鴨記無見過, 但有些0.6mm外徑的亦不錯~
1粒LED 出5枚條光纖!!! 果然勁!!! 更加期待下一集戲肉
ReplyDelete[版主回覆07/28/2011 18:09:00]4條光纖啫... 下一集... 「打通任督二脈」
Good job! Looks like your new blog is alright.
ReplyDelete[版主回覆07/28/2011 22:34:49]And multiple reply too!
[版主回覆07/28/2011 22:34:28]Another problem! Messages are sorted in decending order!
Good news is, it works fine with iPhone now!
團長率先改版!勇!
ReplyDelete用艾瘋回到,又幾好喎~
[版主回覆07/29/2011 14:11:24]正所謂:禾不入地獄,啊水入地獄~