2009-11-29

超細LED (Surface Mount LED)焊接分享

有好多朋友問這超細LED是怎樣焊接, 就寫篇簡單的心得分享。

IMG_3637-1.JPG


1. 先用雙面膠紙把LED固定在一些唔食錫的工具上, 我就會用尖嘴鉗:


(註: 發光面向上)


2. 把小量的錫焊在線頭上:


3. 左手用小鉗夾着電線, 把線頭有錫的部份固定在LED的焊接位, 然後右手揸"辣雞"將之焊上。 我用40W辣雞, 只要點線頭約2至3秒便可！

IMG_3642-1.JPG


4. 完成:

IMG_3643-1.JPG


註: 背面有個打橫嘅T字, 正極係T字頂嗰一劃... 圖中左面是負極, 右面是正極。

IMG_3644-1.JPG


超細LED可以在鴨寮街marker位的"星際＊＊ (Cosmos Tele_ _ _)"找到:

map.jpg

5元一粒, 我不知它中文的學名, 我話:「手提電話backlight LED...」
英文學名係Surface Mount LED.

at
Labels:

28 comments:

  1. 僱傭兵Sunday, November 29, 2009 at 7:36:00 PM GMT+8

    (Empty)
    [版主回覆11/29/2009 20:49:00](Empty)

    ReplyDelete
  2. ALPHASunday, November 29, 2009 at 11:26:00 PM GMT+8

    眼力好勁....羨慕...
    [版主回覆11/29/2009 20:50:00]用放大鏡呀嗎

    ReplyDelete
  3. marcolauMonday, November 30, 2009 at 3:37:00 AM GMT+8

    光度如何~~~??
    [版主回覆11/29/2009 20:58:00]砌隻25S時影的: http://hk.myblog.yahoo.com/gundam-jkl/article?mid=13091 只比3mm的超光LED暗小小

    ReplyDelete
  4. TerenceMonday, November 30, 2009 at 4:53:00 AM GMT+8

    果然夠嗮心靈手巧```
    雖然只係幾個簡單嘅步驟，但想證明一件事，係大佬J你返老還童定係我嘅老花又加深咗呢```
    [版主回覆11/29/2009 21:00:00]都話用咗放大鏡咯...

    ReplyDelete
  5. TerenceMonday, November 30, 2009 at 5:03:00 AM GMT+8

    咁我咪要用顯微鏡至接到線```
    [版主回覆11/29/2009 21:41:00]哈哈哈... 我都就嚟要...

    ReplyDelete
  6. RyanMonday, November 30, 2009 at 6:21:00 AM GMT+8

    終於有得睇
    [版主回覆11/30/2009 09:30:00]其實都係無乜大不了...

    ReplyDelete
  7. TomMonday, November 30, 2009 at 8:43:00 AM GMT+8

    wow how can u craft something that small i will wreck it in sec XD
    [版主回覆11/30/2009 09:31:00]I busted a few before I can really make it...

    ReplyDelete
  8. CHRISMonday, November 30, 2009 at 8:50:00 AM GMT+8

    感謝大大 手震先係我最大的敵人
    [版主回覆11/30/2009 09:33:00]所以咪要用嘢固定佢囉

    ReplyDelete
  9. MOPMonday, November 30, 2009 at 1:04:00 PM GMT+8

    這麼細的活手都不抖  厲害
    [版主回覆11/30/2009 09:35:00]沒有啦... 心定自然手定

    ReplyDelete
  10. 喜樂的森Monday, November 30, 2009 at 5:52:00 PM GMT+8

    太厲害了! 就嚟可以做埋首飾設計了!
    [版主回覆11/30/2009 09:54:00]又關首飾咩事呢?

    ReplyDelete
  11. HathawayMonday, November 30, 2009 at 9:47:00 PM GMT+8

    我老啦, 呢d超精密工程真係跟唔到....
    [版主回覆11/30/2009 14:03:00]我都未話老, 你老? 調養好身子再創高峰吧

    ReplyDelete
  12. CUMonday, November 30, 2009 at 10:27:00 PM GMT+8

    JKL兄: 我入左好多!! 你要的話 , blog友2蚊 價^^
    [版主回覆11/30/2009 14:31:00]都好喎, 有無50粒?

    ReplyDelete
  13. NIKEMonday, November 30, 2009 at 10:34:00 PM GMT+8

    我都係第一次焊SMD燈，佢好細睇到我老眼昏花，要用放大鏡至搞得掂...！！ 謝謝JKL大大敎路...！！
    [版主回覆11/30/2009 14:51:00]唔好客氣

    ReplyDelete
  14. CUMonday, November 30, 2009 at 10:41:00 PM GMT+8

    暫時有橙, 藍, 黃綠, 紅, 綠 ..5種色 ^^ 可以寄比你 , 若你想面交的話 , 我12月4日返hk ^^
    [版主回覆11/30/2009 14:51:00]CU兄, 你嗰D係乜嘢size呢? http://www.lc-led.com/Products/department/29 黃/紅色是否都係3V? 我唔急, 可等你返港先交收

    ReplyDelete
  15. Jacky HoMonday, November 30, 2009 at 10:56:00 PM GMT+8

    揾日要試試!!!
    [版主回覆11/30/2009 15:01:00]Unicorn 25F...

    ReplyDelete
  16. 海威Tuesday, December 1, 2009 at 12:34:00 AM GMT+8

    得閒去搵下先.....放係屋企玩下都ok
    [版主回覆11/30/2009 16:38:00]放係屋企玩??? 一分鍾內一定會整唔見

    ReplyDelete
  17. Johnduke 島主Tuesday, December 1, 2009 at 3:13:00 AM GMT+8

    神, 重有無搵得到有腳又係咁細而又係3V 既呢? 話時話, 點知佢係用既多V? 神, 去唔去買冷光板先?
    [版主回覆12/01/2009 12:08:00]有腳又係咁細而又係3V? → 我都想要... 點知佢係用既多V? → 問吓賣俾你間舖 冷光板... 還考慮中呢... 主, 有無諗住買Bandai新出嗰塊發光地台板呀? http://gunpla.jp/jgoc/kensakug/upfile/catalog/img_nf/0161392_img_package_187.jpg

    ReplyDelete
  18. Godzilla . exTuesday, December 1, 2009 at 3:34:00 AM GMT+8

    咁細粒....點整呀
    小弟投降
    [版主回覆12/01/2009 12:09:00]心定神閑

    ReplyDelete
  19. YAYATuesday, December 1, 2009 at 5:28:00 AM GMT+8

    攪到我心大心細想玩下添!
    [版主回覆12/01/2009 12:10:00]個個都開始玩燈, 玩埋一份啦

    ReplyDelete
  20. RyanTuesday, December 1, 2009 at 5:59:00 AM GMT+8

    焊大野(燒電焊)我就定到手 焊細野我唔手震就掂住太耐縮唔切 成日搞到辣爆燈 真係要睇住你呢篇買堆手機燈練下
    [版主回覆12/01/2009 12:11:00]主要係唔好辣多過3秒

    ReplyDelete
  21. PHILIPTuesday, December 1, 2009 at 7:16:00 AM GMT+8

    其實焊都唔算難.. 不過我發現佢好易就會址甩個錫位.. o者係址開左.. 就唔會再可以上到銻落個LED度.. 我4粒有3粒都係o甘..
    所以用d 軟d o既線焊會好d..  ^^ 
    [版主回覆12/01/2009 12:13:00]無錯, 係線嘅問題, 要唔要試下我用嗰D?

    ReplyDelete
  22. 地理堂Tuesday, December 1, 2009 at 7:24:00 AM GMT+8

    原來要先上錫在電線上，好辦法 
    [版主回覆12/01/2009 12:13:00]試試下試出來的

    ReplyDelete
  23. TOMTuesday, December 1, 2009 at 10:59:00 AM GMT+8

    咁咪可以做到車嘅指揮燈囉
    [版主回覆12/01/2009 12:14:00]指揮燈? 要揾timer IC喎...

    ReplyDelete
  24. PHILIPTuesday, December 1, 2009 at 9:32:00 PM GMT+8

    我估下次先試你d線啦.. 我d燈接好左了.. 而且我都無用到最細果隻.. 用左中size果隻.. 因為想光d..
    不過其實我都唔知佢係幾多Volt... 不過3v整得著佢咪得lor.. 4.5v都唔燒
    ps.. 你post果個.. 發光地台板真係幾正..
    [版主回覆12/01/2009 14:55:00]4.5v小心燒呀...

    ReplyDelete
  25. CUWednesday, December 2, 2009 at 12:11:00 AM GMT+8

    係2mm x 1.6mm  3V 的!  我用1粒CR1220 電就着 ^^
    [版主回覆12/02/2009 18:11:00]正！咁你有無白光呢?  黃綠是編黃定係編綠呢? 我好有興趣要白, 藍, 黃, 紅...

    ReplyDelete
  26. PHILIPWednesday, December 2, 2009 at 11:29:00 PM GMT+8

    我估想燒都幾難呢.. d電要推成21粒LED... 內置電玩幾個字都已經玩完了.. 睇黎都係要整埋個地台俾電佢先可以玩耐D.. ^^
    [版主回覆12/02/2009 18:13:00]Wow! 原來21粒! 睇來都真係要整埋個地台供電囉...

    ReplyDelete
  27. CUThursday, December 3, 2009 at 3:04:00 AM GMT+8

    黃綠是編黃 !   暫時未有白光^^
    [版主回覆12/03/2009 01:27:00]咁我想要: 藍, 黃, 紅 各廿粒先 等你回港再聯絡... THX

    ReplyDelete
  28. CUFriday, December 4, 2009 at 2:42:00 AM GMT+8

    12月5日星期六5:30-6:00pm 左右 旺角交收 好冇?  
    [版主回覆12/04/2009 10:41:00]5:30pm ok, 旺角MTR邊個位?

    ReplyDelete

Subscribe to: Post Comments (Atom)